oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 867-sl174.0m-10a 174.0 mhz if saw filter 10.50 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 867-sl174.0m-10a january 2011 rev a 174.0 mhz if saw filter 10.50 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit (image wrong) pin description a, b, c, e, f, g, h, i, k, l ground j input d output test fixture & values input l1=56 nh, c1=36 pf output l2=56 nh, c2=36 pf source/load impedance 50 ?
oscilent part number 867-sl174.0m-10a january 2011 rev a 174.0 mhz if saw filter 10.50 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - +80 storage temperature range c -40 - +85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 173.80 174.00 174.20 insertion loss at fo db - 13.97 16.0 amplitude ripple variation at fo 3.9 mhz db p-p - 0.30 0.8 group delay variation at fo 3.9 mhz nsec - 30 80 absolute delay at fo sec - 0.73 - temperature coefficient ppm/c - -18 - bandwidth at ?1.0 db mhz 10.00 10.50 - bandwidth at ?3.0 db mhz - 11.50 - bandwidth at ?40.0 db mhz - 15.60 16.00 relative attenuation lower sidelobe db 40 47 - upper sidelobe db 40 47 -
oscilent part number 867-sl174.0m-10a january 2011 rev a 174.0 mhz if saw filter 10.50 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db wide-band
oscilent part number 867-sl174.0m-10a january 2011 rev a 174.0 mhz if saw filter 10.50 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo3.9mhz group delay variation fo3.9mhz smith chart
oscilent part number 867-sl174.0m-10a january 2011 rev a 174.0 mhz if saw filter 10.50 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|
